Six pack of 3-layer diaper inserts made with two outer layers of bamboo viscose fabric and an inner absorbent fleece pad. These 3-layer bamboo inserts are perfect for adding absorbency to a microfiber insert. You'll be surprised at how much these inserts can absorb without adding bulk. Also called a "doubler", it's a useful addition to nap or bedtime or for heavy wetters.
Number of inserts Included: 6
Layers: 2 outer layers of bamboo rayon + 1 inner fleece pad
Fabric Content: bamboo viscose, with 80% bamboo and 20% polyester; fleece pad is 100% polyester
Measurements: approximately 13 x 5 inches after prep
PREWASH: Before first use, wash in hot water with a small amount of detergent. Machine dry low heat. The insert will shrink to size and achieve peak absorbency during this process. After the initial prep is complete, insert may be washed and dried with the rest of your diapers.
*** Please note that computer monitors display colors differently and everyone can see these colors differently. We try extremely hard to ensure our photos are as life-like as possible, but please understand the actual color may vary slightly from your monitor.
Bamboo Cloth Diaper Insert *Booster* (6 pack)
Bamboo Cloth Diaper Insert *Booster* (6 pack)
$15.00
How to Care for Your Diaper & Insert
LAUNDERING instructions are printed on the wash label located inside the pocket of the diaper. Failure to follow the care instructions may cause issues with leaking or absorbency and will void the warranty.
LINE DRY your pocket diaper for best results. Repeated use of high heat in the drying process can degrade the waterproof layer over time. Diaper inserts can be washed and dried on high heat.
DO NOT use fabric softeners, diaper cream, rash cremes or lotions with your pocket diaper or insert. These products will leave a residue that will reduce absorbency.
DO NOT use bleach on your pocket diaper. For best results, line dry your pocket diaper in direct sunlight which will act as a natural bleaching agent.
How to Use Your Pocket Diaper & Insert
POCKET DIAPERS are constructed of an outer waterproof layer to prevent leaks and an inner microsuede layer to wick liquid away from baby's skin. The area between the two layers creates a "pocket" with an elasticized opening located at the top back of the diaper.
DIAPER INSERTS are constructed of absorbent material to soak up liquids and are placed inside the pocket of the diaper.
STUFFING is a term given to the process of placing the diaper insert through the pocket opening into the diaper.
TO USE: Stuff the diaper insert into the diaper through the pocket opening. Make sure the insert lays flat and is not twisted or bunched. Fasten diaper around baby to form a snug yet comfortable fit. Experiment with snap settings to get the best fit at the waist, hip and rise. When the diaper is soiled, shake any loose solids into toilet. Remove insert from pocket. Store diaper and insert in dry pail until laundering.
These are great and exceptionally well made! Friendly shipper and fast shipping!!
Very soft and fast shipping! Not very thick and soft!
Great quality. I love these and actually use them under my large breasts to absorb sweat. Excellent product that exceeded my expectations in softness, absorbency and washability.